Post by tutu on Jul 21, 2011 3:44:55 GMT
1. Dip Angle (Loft) : cue, rod surface normal parked centerline and ground the plumbline is the Angle between the. 2. (rod body) hardness Flex) : (is to make the rod body bent easy degree, divided into L (lady), R (conventional), S (Stiff) and so on, this is beautiful and sundials rules the biggest different, the ball Cheap Golf Equipment
of different companies have different. 3. Swing weight (weight) : also called Swing, Swing balance with the club's center of gravity and the weight. The heavier the weight, the focus away from the stem the closer it was shut (hold more far), the greater the weight of the golf swing. 4. Stop Angle (Lie) : cue, rod park normal body the centerline and ground that form a perspective, the elevation Angle caused by too much become warped head (Upright). Too small will cause (Flat) down. Note: 1. A man short woman cue cue 1 inch, and short distance from 30 yards, rod body (LIE) once more Angle to the left. 2. Professional male athletes, the kind of distance every 1 bar are apart from 15 yards, amateur for male athletes are apart from 10 yards.
The material of the golf club
1, carbon materials: mainlyTaylorMade R11 Driver
used to make carbon rod body. General is in graphite join in, or join carbon ceramic components and glass fiber, etc, make more the light more strong; 2, titanium alloy: generally used in the manufacture of DRIVER stem head. The density of titanium is fairly small, about 60% of the iron. But has high strength, high temperature heat treatment can be easily, welding, forging characteristics. Titanium alloy is refers to the pure titanium join in other metals, and to improve his characteristics. 4. 42 iron 7. 86 6-4 titanium: it's in the pure titanium to 6%, 4% and, aluminum casting are used to-stem head beta titanium (usually in the sense of)-in a pure titanium to 15%, 3%, 3% are chrome aluminum, 3% nickel, multi-purpose forging stem head; With the above the 15-3-3-SP700 3 beta titanium, belong to the high performance similar productsTaylorMade R9 Driver
Golf clubs
Qualitative beta titanium. 3, tungsten: tungsten density is quite large, about 4.5 times of titanium, more for stem head counterweight. Tungsten (19.5) 4, mild steel: soft iron in casting iron. When in stainless steel, add the 2 to 4% of the carbon that becomes very hard; Forging, Taylormade R11 Fairway Woods
add 0.1 ~ 0.3% of carbon, can become soft; Stainless steel, stainless steel, 5-sus630 (added 17% 4% chromium and nickel)-more for casting, earlier for the PING famous back empty type cast iron, now widely used in iron and wood pole. -sus304 (added 18% chromium and nickel 8%), it sus630 than soft. 6, other materials: beryllium copper: (copper + 1% ~ 2.5% in the beryllium), than stainless steel weighing about 6-7%-often used to make dig up stem. Aluminum alloy: (+ 4%-6% aluminum lead and 2% 3% magnesium), lighter, stronger and easy processing, also used in the manufacture of DRIVER stem head. 7, push rod materials: stainless steel, copper, bronze, copper, polymer, polyurethane, aluminum, stainless
Muzino JPX 800 Driver
of different companies have different. 3. Swing weight (weight) : also called Swing, Swing balance with the club's center of gravity and the weight. The heavier the weight, the focus away from the stem the closer it was shut (hold more far), the greater the weight of the golf swing. 4. Stop Angle (Lie) : cue, rod park normal body the centerline and ground that form a perspective, the elevation Angle caused by too much become warped head (Upright). Too small will cause (Flat) down. Note: 1. A man short woman cue cue 1 inch, and short distance from 30 yards, rod body (LIE) once more Angle to the left. 2. Professional male athletes, the kind of distance every 1 bar are apart from 15 yards, amateur for male athletes are apart from 10 yards.
The material of the golf club
1, carbon materials: mainlyTaylorMade R11 Driver
used to make carbon rod body. General is in graphite join in, or join carbon ceramic components and glass fiber, etc, make more the light more strong; 2, titanium alloy: generally used in the manufacture of DRIVER stem head. The density of titanium is fairly small, about 60% of the iron. But has high strength, high temperature heat treatment can be easily, welding, forging characteristics. Titanium alloy is refers to the pure titanium join in other metals, and to improve his characteristics. 4. 42 iron 7. 86 6-4 titanium: it's in the pure titanium to 6%, 4% and, aluminum casting are used to-stem head beta titanium (usually in the sense of)-in a pure titanium to 15%, 3%, 3% are chrome aluminum, 3% nickel, multi-purpose forging stem head; With the above the 15-3-3-SP700 3 beta titanium, belong to the high performance similar productsTaylorMade R9 Driver
Golf clubs
Qualitative beta titanium. 3, tungsten: tungsten density is quite large, about 4.5 times of titanium, more for stem head counterweight. Tungsten (19.5) 4, mild steel: soft iron in casting iron. When in stainless steel, add the 2 to 4% of the carbon that becomes very hard; Forging, Taylormade R11 Fairway Woods
add 0.1 ~ 0.3% of carbon, can become soft; Stainless steel, stainless steel, 5-sus630 (added 17% 4% chromium and nickel)-more for casting, earlier for the PING famous back empty type cast iron, now widely used in iron and wood pole. -sus304 (added 18% chromium and nickel 8%), it sus630 than soft. 6, other materials: beryllium copper: (copper + 1% ~ 2.5% in the beryllium), than stainless steel weighing about 6-7%-often used to make dig up stem. Aluminum alloy: (+ 4%-6% aluminum lead and 2% 3% magnesium), lighter, stronger and easy processing, also used in the manufacture of DRIVER stem head. 7, push rod materials: stainless steel, copper, bronze, copper, polymer, polyurethane, aluminum, stainless
Muzino JPX 800 Driver